1080p Starlight H.265 IP Camera Module
NMHC2291

2MP, 1/2.8" SONY IMX290 / IMX291 CMOS, supreme low light performance, video codec: H.265 / H264 / MJPEG, up to 30 fps in 1920 x 1080 resolution, triple streaming, PoE (optional), ONVIF Profile S

 

*lens not included

  • Overview
  • Specifications
  • Downloads

 

Features

1/2.8" SONY IMX290 / IMX291 CMOS sensor

2 Megapixels

Starlight series with supreme low light performance

Video codec: H.265, H.264, MJPEG

Triple individually configurable video streams

Up to 30 fps in 1920 x 1080 resolution; 30fps in all other resolutions

HDR

Power over Ethernet (optional)

Supporting ONVIF Profile S

System on Chip (SoC) Hi3516C V300
Image Sensor 1/2.8" SONY IMX290 / IMX291 CMOS
Lens

Not included

DC-iris

Supported (optional)

Minimum Illumination

0.001 Lux/F1.2 (color); 0.0005 Lux/F1.2 (B/W)

HDR

100dB

Video Codec: H.265, H.264, Motion JPEG
Resolutions: 1920 x 1080 to 480 x 272
Frame rate: up to 30 fps in 1920 x 1080; up to 30 fps in all other resolutions
Streaming: triple
Rate control: VBR/CBR/fixed QP
Standards ONVIF Profile S
Memory 128 MB RAM, 16 MB flash
Network

Network Interface: 100 Mbps Ethernet

Supported Protocols: IPv4, IPv6, ICMP, IGMP, QoS, TCP, UDP, DHCP, DNS, DDNS, mDNS, zeroconf, HTTP, HTTPS, NTP, RTP, RTCP, RTSP, TLS, UPnP, ARP

Supported Protocols (optional): FTPS, RTMP, SIP, SMB/CIFS, SMTP, SNMPv3, WebRTC, P2P, 802.1X, PPPoE

Audio

Audio Coding: G.711 PCM, G.726 ADPCM, MP3 (optional), AAC LC (optional)

Audio Interface: microphone in, line out

System Integration 1 alarm in, 1 alarm out
Power Source

DC 12V, Power over Ethernet (optional)

Power Consumption Typical 2.8W
Operation Condition -20~50°C
Dimension (L x W x H) 38mm*38mm*9.5mm
Weight 26g
Datasheet 2018.7.27 .pdf Download
Firmware coming soon    
Quick installation guide coming soon    
User’s manual coming soon